Junger-audio C8611 - Dolby® E encoder Bedienungsanleitung PDF herunterladen (Seite 7)

digital audio

modular

processing system

C8000

Dolby

E encoder

C8611

7/13

BACKUP Pressing <BACKUP> will move all settings including the Presets to the

PC, so you can store the backup data to a file.

RESTORE Pressing <RESTORE> after loading a backup file will move all settings

including the Presets back to the module.

SETUP / ROUTING : setup of the module and the Bus routing

From C8000 Bus The audio busses from the C8k frame must be assigned to the encoder

for the respective signals. The labels at the encoder input show which

signals the encoder expects due to its configuration determined by

Program Config (see DOLBY E page). If some of the 8 input signals are

multiplexed in 8ch mode, you must check the respective channel check

boxes (see example above). This is the so called MixMux mode where

the module may be fed from a combination of 2Ch and 8Ch signals.

8ch Mux here one must select the bus that is fed in 8 channel Mux mode from an

upstream module. The check boxes below determine which channel pair

will be taken from the 8 channel Mux.

1 2 3 4 5 6 7 8 9 10 11 12 13

Keine Kommentare

Junger-audio C8611 - Dolby® E encoder Bedienungsanleitung Seite 7